Putting chocolate in mold

Creating chocolate masterpieces used to be the specialty of artisan bakeries and stores. Now, with advances in cooking, anyone can create chocolate masterpieces within the realms of their own homes. Spruce up that next holiday meal or add a little extra charm to that hum-drum cake by creating your own chocolates with the help of plastic chocolate molds. Make your friends and family think you took hours to make individualized chocolates by following these simple steps when creating your next chocolaty masterpiece.

Prepare the Chocolate

Purchase specialty candy-making chocolate. Most grocery stores and/or craft stores carry this particular type of chocolate. It is important that you use candy-making chocolate when molding; otherwise, the chocolate will not set properly within the chocolate molds.

Prepare your desired batch by following the instructions on the chocolate candy bag. Work with small chocolate batches because candy-making chocolate hardens quickly.

Fill bottom pan of a double-boiler pan with hot tap water. Don't fill the bottom pan more than half-way; the water must not touch the pan above it. Remember that you will also be warming the water, and although it won't be boiling, it is important to remember that water moves when warmed.

Insert top pan with selected amount of candy-making chocolate into place above the bottom pan.

Use medium heat to warm the candy chocolate. Stir often to avoid hardening and overcooking of the chocolate.

Add and stir in room-temperature nuts, raisins or other desired items once chocolate has melted.

Fill the Molds

Check your chocolate molds for debris and wetness. If molds are dirty or wet, chocolate will not form properly. Remove all debris and wetness from molds before using.

Store molds at room temperature at all times.

Place chocolate into a polypropylene bag, or use a small ladle or spoon to scoop warm chocolate from pan. If you are using a polypropylene bag, trim the bottom of the bag after it has been properly filled with chocolate. You can purchase specialty chocolate bags at crafts stores.

Pipe or scoop chocolate into the molds. Fill the chocolate up to the top line of the mold. If some chocolate overflows, use a spatula to level off and scrape any extra chocolate from the surface.

Tap the molds on the countertop to remove any excess air bubbles from the chocolate. Air bubbles can cause cracking during the hardening process.

Place chocolate molds in the refrigerator on a level shelf. Check molds every few minutes while in the refrigerator to make sure overcooling does not happen. Small condensation drops on the surface of your chocolate or cracks in your chocolate indicate that the chocolate has sat in the refrigerator too long.

Remove the chocolate molds from the refrigerator once hardened. The overall hardening process should take about 10 to 20 minutes, depending on the size of the molds--10 minutes for molds that are quite small, 20 for molds that are considerably bigger in size.

Turn molds upside down on a dry surface. Tap gently on the molds. If completely hardened, the chocolate should easily come out.

Place the chocolate back into refrigerator if it does not fall easily out of the molds. Pull molds out of refrigerator and repeat steps 7 and 8 until all chocolate has come out of the molds.

Towel off any extra moisture that may have developed on chocolate with a paper towel. Place on plate and serve.


  • For a more professional look, use specialized chocolate handler's gloves to avoid fingerprints on your chocolate. You may also drizzle additional chocolate over the molds to give it a contrast in color.